-Omni-directional light spread designed for beautiful light shaping!
-2K Output, 5500K Daylight, CRI 97+, TLCI 97+, RA 96+, DMX 512, Wifi 2.4 Ghz
-Flicker-free dimming, at every frame rate and shutter angle/speed.
-Designed for both Indirect and Direct mounting.
-One setup for both photo and video!
-Includes IP65 hardshell flight case.
Finally, an LED designed for Light Shaping.
The Parabolix OMNI™ was designed specifically for light shaping, to give photo and video creators the light quality they love. No more flat COBs (chip-on-board) that are designed only for hard light, or flat panels that produce only flooded fill. The Parabolix OMNI™ has a 3-dimensional lamp that gives 3-dimensional light shaping, making it the ideal beauty and key light. While most LEDs are flat and have limited directional spread (ie, not designed to fill a soft-light modifier), the OMNI™ creates a perfect omni-directional spread, which fills your modifier completely and evenly, unlike any other lamp on the market. This results in a rich and dimensional light, with gorgeous highlights, and color/shadow transitions necessary for a soft key source.
Photo & Video With One Light.
Our unique patent-pending lamp design, paired with its raw output power, makes the OMNI™ the one and only light you need for both photo stills and video. Enjoy the same beautiful light-shaping quality in your videos that you get in your stills. No need to change setups. This saves time and money!
Power and Quality
The Power and Beauty of an HMI, the Convenience of an LED.
With total output equivalent to a 450W COB (chip-on-board), yet perfectly even omni-directional spread, the OMNI™ is a powerful beauty light, capable of both video and stills.
Lamp Features:
2K Output
5500K Daylight
97+ CRI/TLCI
96+ RA
-
2x brighter than a 600W RGB panel
-
1.5x brighter than a 300W COB daylight
Designed for both Indirect and Direct Mounting.
Our patent-pending lamp design provides a reversible mount which allows for easy use and maximum flexibility. No need for any additional cages or brackets – the support structure is built directly into the lamp! Mounting is easy with the included 5/8″ socket adapter. Mount it indirectly inside a Para or other indirect modifier. Mount it directly – like a standard lamp – for softboxes, lanterns, etc.
Front Mounting for Indirect modifiers
Base Mounting for direct modifiers
The included 5/8″ socket adapter mounts to either side of the lamp.
Patent-pending lamp design!
Front plate mounting for Indirect Lighting. Works with Parabolix™ and all other focusable Para systems, using the included 5/8″ socket adapter.
Base plate mounting for Direct Lighting. Mounts like a standard lamp onto a lantern, softbox, etc., using the speedring accessory.
Indirect Mounting
Shown with a Parabolix 35D.
Direct Mounting
Shown with a 65cm Lantern.
DMX 512
With DMX In and Thru, you can easily control multiple units from any DMX controller or board.
OMNI Connect™
With 2.4 Ghz Wifi built-in, and the free OMNI Connect app, you can control as many units as want from you phone or tablet. Each OMNI™ can be assigned to a group, and groups can be controlled by your device.
Android devices are supported for the initial release, and Apple devices will be supported in 2022.
